(The following is an excerpt from the introduction of the AN-DEM - Description and Interface Control Document. The complete document can be found at the CloudSat Standard Data Product Interface Control Document links page. )
The Digital Elevation data is taken from the GTOPO30 database. Elevations retrieved from this database are included in the Level 1A-Auxiliary Data and eventually in level 2 products.
GTOPO30 is a global digital elevation model (DEM) resulting from a collaborative effort led by the staff at the U.S. Geological Survey's EROS Data Center in Sioux Falls, South Dakota. Elevations in GTOPO30 are regularly spaced at 30-arc seconds (approximately 1 kilometer). The current release represents the completion of global coverage of 30-arc second elevation data that have been available from the EROS Data Center beginning in 1993. Several areas have been updated and the entire global data set has been repackaged, so these data supersede the previously released continental data sets.
GTOPO30 covers the full extent of latitude from 90 degrees south to 90 degrees north, and the full extent of longitude from 180 degrees west to 180 degrees east. The horizontal grid spacing is 30-arc seconds (0.008333333333333 degrees), resulting in a DEM having dimensions of 21,600 rows and 43,200 columns. The horizontal coordinate system is decimal degrees of latitude and longitude referenced to WGS84. The vertical units represent elevation in meters above mean sea level. The elevation values range from -407 to 8,752 meters. In the DEM, ocean areas have been masked as "no data" and have been assigned a value of -9999. Lowland coastal areas have an elevation of at least 1 meter, so in the event that a user reassigns the ocean value from -9999 to 0 the land boundary portrayal will be maintained. Due to the nature of the raster structure of the DEM, small islands in the ocean less than approximately 1 square kilometer will not be represented.